Lorem Ipsum is dummy text
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.
SERVICES WE PROVIDE
1
MODERN IDEAS
WARNING: Modification, improper service, or use of aftermarket replacement parts with FOX forks and shocks may cause the product to malfunction, resulting in SERIOUS INJURY OR DEATH. DO NOT modify any part of a fork or shock, including the fork brace (lower leg cross brace), crown, steerer, upper and lower leg tubes, or internal parts, except as instructed herein. Any unauthorized modification may void the warranty, and may cause failure or the fork or shock, resulting in SERIOUS INJURY OR DEATH.
2
WEB DEVELOPMENT
WARNING: FOX suspension products contain pressurized nitrogen, air, oil, or all 3. Suspension misuse can cause property damage, SERIOUS INJURY OR DEATH. DO NOT puncture, incinerate or crush any portion of a FOX suspension product. DO NOT attempt to disassemble any portion of a FOX suspension product, unless expressly instructed to do so by the applicable FOX technical documentation, and then ONLY while strictly adhering to all FOX insturctions and warnings in that instance.
3
SUPERIOR SUPPORTS
WARNING: FOX products should be serviced by a qualified bicycle service technician, in accordance with FOX specifications. If you have any doubt whether or not you can properly service your FOX product, then DO NOT attempt it. Improperly serviced products can fail, causing the rider to lose control resulting in SERIOUS INJURY OR DEATH.
Step 1
Turn the red Rebound knob fully counter-clockwise. Place the 15mm Hex torque tool (PN: 398-00-823) into your vise. Position the 2020 9mm Thru-Shaft shock onto the hex tool engaging the flats within the body. Use smooth-jawed parallel pliers (Knipex) on the flats of the Clevis to unthread the Clevis counter-clockwise from the body.
Step 2
Remove the black air cap and slowly release all air from the main air chamber. Verify that all air has been released by depressing the Schrader valve with a lint-free towel covering the valve to prevent any oil spray.
